Posted 21 Apr 2020 Dear Expertise I want to create system SCADA with existing PLC FX3G-60MR connected HMI Touchwin OP320 SCADA system expectation can upload data to cloud. But i don't know the device to transfer from PLC FX3G to Cloud Please help Share this post Link to post Share on other sites
Posted 21 Apr 2020 You will need to be a little more specific on what you want to achieve. I would start by looking at the communication protocols that your PLC is capable of handling. I believe that it can communicate Modbus RTU (Serial) via RS232 or RS485.https://dl.mitsubishielectric.com/dl/fa/document/manual/plc_fx/jy997d16601/jy997d16601q.pdf Take a look at AdvancedHMI. This is a software package that is written in VB.net and runs on Visual Studio. It has the drivers already programmed for both Modbus RTU and TCP. Once you collect the data into the computer then you can save it to a database. Sharing the data online can be done in several different ways. We really need to know what you need to accomplish. I hope this helps you out. Regards, Garry Share this post Link to post Share on other sites