Transfer Setup

[wzrdstrm 1]

Is it possible to connect via the integrated ethernet on a Q3 CPU through CClink to program a Q2 CPU? I can only find the possibility to connect to a GOT via ethernet and then from the GOT to the 2Q CPU via CClink.

 I need to program the Q2 CPU through the Q3 CPU using the integrated ethernet on the Q3. CPU's are connectected together via CClink.

any help greatly appreciated.

[AlbertRN_21 0]

Open your Q2 project and create a new connection, I've called it Ethernet_CCLink in my example.

PC side and PLC side I/F should be set as per your Q3 project.

Select "Other station [Single network]" 

Double click "CC-Link"

Head I/O is the slot address of the CC Link module in the Q3 rack

Station number is the station number of the CC Link module in the Q2 rack.

Connect to the Q3 via ethernet cable and select connection test and it should come up with "succesfully connected with the Q2"

[wzrdstrm 1]

oooooh... I hope this works....! TY much appreciated!!!

 

[wzrdstrm 1]

This worked perfect, once I removed the crap from my eyes, again, much appreciated.