ID231 and OD232 front connector

[cyrus 0]

hi dears

i have digital input and digital output modules (ID231 and OD232)

i want screw connector for them, whats is order for it?

i bought these module but in the pack there is not any connector for module. the connector must be ordered separately?

 

thanks

[gtsuport 61]

Those are 32 bit I/O modules.

There are no front screw connectors available.

You will need to use cables (XW2Z-xxxK) and screw terminal blocks (XW2B-40G5).   xxx in cable number = length in meters ie: 100 = 1 meter.

[cyrus 0]

thank you for your reply

that means that i must use screw terminal block and cable together?

i bought AD081 (analog input module) and it has front connector mounted on module.

i want to mount terminal block or front connector on Module, is there a solution for it?

Edited 2 Mar 2020 by cyrus

[gtsuport 61]

There is no solution for terminal front connectors on 32 point modules.

[cyrus 0]

can i connect one side of flat cable to Digital Module and cut another side and connect wires of them to terminals?

flat cable has wire number? 

[cyrus 0]

my digital modules  (ID231 and OD232) is CS1D module (not CJ1)

ID231 in CS1D and (CJ1 or CJ2) wiring cable is similar?

can i use  XW2Z-xxxK  for CS1D-ID231 and CS1D-OD232?

 

[cyrus 0]

can you give me order number for  screw terminal blocks and Cable for CS1D-ID231 and CS1D-OD232?

[gtsuport 61]

Having trouble finding information on the CS1W-ID231 and CS1W-OD232.

I think these are Fujitsu style connectors, but not sure.

If you look at the front of the module, Are the top and bottom somewhat rounded, or are the straight?

[Michael Walsh 268]

 

The ___ in the cable part umber is length.  050 = 0.5m, 100 = 1m, 200 = 2m, etc.

[gtsuport 61]

Thank you Michael.

Did not find that image.

[cyrus 0]

Thank you gtsuport