Gatzrulz

s7 300 S7 300 Hardware Configuration - Simatic Manager

3 posts in this topic

Hi,

Is it possible to have two hardware configurations which can be switched through HMI. currently i have two hardware configurations and the project remains same. So without connecting with Simatic Manager i want to switch the hardware configuration. 

Share this post


Link to post
Share on other sites
On 2/20/2020 at 4:43 PM, Gatzrulz said:

Hi,

Is it possible to have two hardware configurations which can be switched through HMI. currently i have two hardware configurations and the project remains same. So without connecting with Simatic Manager i want to switch the hardware configuration. 

I believe the answer to this to be a no....

However you have 2 possibilities here: -

1. Create 2 SIMATIC Projects, load the respective project into the PLC as and when you need to

2. Create your Project with all relevant nodes (so compile your project with a full list of hardware)- you can then use System Function SFC12 to "disable" individual nodes, then you can "enable" them later when required. Using this method will stop the CPU calling a fault OB and moving the PLC to stop mode.

 

Let me know what you think.

 

Regards

 

Daniel

Share this post


Link to post
Share on other sites

What do you want to do?

It is possible.

What do you want to communicate between the hardware configurations?

If you want to change information then it will work with help of tags.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now