ALMIGHTY79

How to configure modbus tCP /IP Qj71mt91 with 3 slave QJ71MT91

41 posts in this topic

11 hours ago, NevergoldMel said:

Honestly, This sounds like a typo. I'd retype everything into the config.

11 hours ago, NevergoldMel said:

Can Honestly, This sounds like a typo. I'd retype everything into the config.

Hello mr.@NevergoldMel.

Can you show me example? How to configuration master and 2 slave Qj71mt91 ?

🙏🙏🙏

Share this post


Link to post
Share on other sites
On 2/24/2020 at 4:29 AM, Djoko said:

Hello mr.@NevergoldMel.

Can you show me example? How to configuration master and 2 slave Qj71mt91 ?

🙏🙏🙏

Why don't you screencapture your settings so we can check it.

 

Share this post


Link to post
Share on other sites
On 25/02/2020 at 7:14 PM, Gambit said:

Why don't you screencapture your settings so we can check it.

 

On 25/02/2020 at 7:14 PM, Gambit said:

Why don't you screencapture your settings so we can check it.

 

 

 

20200226_162245_compress21.jpg

20200227_201629_compress42.jpg

20200227_201358_compress50.jpg

 

20200227_201722_compress43.jpg

20200227_195309.jpg

Edited by Djoko

Share this post


Link to post
Share on other sites
On 25/02/2020 at 7:14 PM, Gambit said:

Why don't you screencapture your settings so we can check it.

 

only slave 1 and slave 2 are configured by distinguishing the ip address.Other parameter not set

Share this post


Link to post
Share on other sites

looks ok is there any other equipment on the network ?

 

Share this post


Link to post
Share on other sites
On 28/02/2020 at 7:18 PM, Gambit said:

looks ok is there any other equipment on the network ?

 

On 25/02/2020 at 7:14 PM, Gambit said:

Why don't you screencapture your settings so we can check it.

 

 

On 28/02/2020 at 7:18 PM, Gambit said:

looks ok is there any other equipment on the network ?

 

there are no other devices connected to the switch, only the laptop and 3 modbus are installed, but when the master and the first slave are working, the second slave cannot  pinging , after being removed from the switch and  installed directly into QJ71 without the hub being connected

Share this post


Link to post
Share on other sites

But it does ping if the master is not comm with slave 1?
 

Share this post


Link to post
Share on other sites
On 25/02/2020 at 7:14 PM, Gambit said:

Why don't you screencapture your settings so we can check it.

 

 

On 28/02/2020 at 7:18 PM, Gambit said:

looks ok is there any other equipment on the network ?

 

there are no other devices connected to the switch, only a notebook and 3 modbus installed 

Edited by Djoko
Wrong sentences

Share this post


Link to post
Share on other sites
22 hours ago, Gambit said:

But it does ping if the master is not comm with slave 1?
 

22 hours ago, Gambit said:

But it does ping if the master is not comm with slave 1?
 

if the master and slave 1are stopped, Slave 2 can be ping and success

 

On 25/02/2020 at 7:14 PM, Gambit said:

 

 

On 28/02/2020 at 7:18 PM, Gambit said:

 

 

there are no other devices connected to , only a notebook and 3 modbus installed 

Share this post


Link to post
Share on other sites
22 hours ago, Gambit said:

But it does ping if the master is not comm with slave 1?
 

On 25/02/2020 at 7:14 PM, Gambit said:

 

 

On 28/02/2020 at 7:18 PM, Gambit said:

 

 

If Master and slave 1 are connected  ,slave 2 cannot pinging,sometimes it can be connected, after 12 times time out

20200303_115806_compress58.jpg

Share this post


Link to post
Share on other sites

You also do not have the CPU's connected on the ethernet ?

Share this post


Link to post
Share on other sites
1 hour ago, Gambit said:

You also do not have the CPU's connected on the ethernet ?

Yes,All cpu are connect to the switch ( hub )

On 25/02/2020 at 7:14 PM, Gambit said:

 

 

On 28/02/2020 at 7:18 PM, Gambit said:

 

 

there are no other devices connected to , only a notebook and 3 modbus installed 

20200303_115806_compress58.jpg

Share this post


Link to post
Share on other sites

What are the IP adressen of the CPU's.

Have you tried removing the CPU from the network. 

Share this post


Link to post
Share on other sites
4 hours ago, Gambit said:

What are the IP adressen of the CPU's.

Have you tried removing the CPU from the network. 

Master .

Cpu  IP = 192.168.3.30.

QJ71MT91  IP = 192.168.3.40

SLAVE 1.

CPU IP = 192.168.3.50.

QJ71MT91 IP = 192.168.3.60.

SLAVE 2.

CPU ( Q02 H CPU ).

QJ71 MT91 = 192.168.3 70

I've tried it, without a CPU connection to Ethernet,But still problem

Share this post


Link to post
Share on other sites
On 03/03/2020 at 8:34 PM, Djoko said:

Master .

Cpu  IP = 192.168.3.30.

QJ71MT91  IP = 192.168.3.40

SLAVE 1.

CPU IP = 192.168.3.50.

QJ71MT91 IP = 192.168.3.60.

SLAVE 2.

CPU ( Q02 H CPU ).

QJ71 MT91 = 192.168.3 70

I've tried it, without a CPU connection to Ethernet,But still 

Until now my problem about Qj71mt91 has not been resolved and I have contacted a technician from the Mitsubishi agent but it has not been resolved either 😑😑😑

Share this post


Link to post
Share on other sites

The only thing i can think of which should be not possible is that you have devices with the same MAC adress.

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now