johntba

omron plc cpu20 memory err

3 posts in this topic

Hi everybody.
On omron plc cpu20 i have constant memory err
After battery drain and plc got out of power i removed all errors with pro15 but i cant find program in ram .all lines in pro15 are with ???? .This mean program lost?Is there any way to restore it or recover?
 

Thank you in advance

Share this post


Link to post
Share on other sites

It looks like your program is lost.

What is the full model number of the PLC?

Does the PLC appear to have a memory module snapped in the front?

Is the builder of the machine still in business?

 

Share this post


Link to post
Share on other sites

http://www.plctalk.net/qanda/showthread.php?t=123751

The same question was posted at the above location.

It sounds like you have a C20K or C20 series Omron controller. The full part number should be printed on the top or side of the PLC.
Yes, your program is lost.
The only way to restore it is to reload from a paper copy or backup if you have it.
You will have to replace the battery, or your program will not be saved in the ram memory.
These controllers also have the ability of an EPROM. This is located under a hatch on the top of the CPU. If the socket is not empty, there is a chance the program might be on it.
https://accautomation.ca/omron-c20k-...oubleshooting/
https://accautomation.ca/purchase-fi...28k-c40k-c60k/
 

Regards,
Garry

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now