Conversion from A to Q

[koelkommer 1]

Good Evening everyone, I do realise that this has possibly been done before but quite a few years ago and the links no longer seem to work or links to Mitsi pages that are in Japanese, so please excuse me. I have soem A series PLC kit that needs replacing and I have bought all new Q series stuff to replace(where possible). I have been languishing a little on this project now for a few months but need to get moving. I purchased a GOT HMI and got a good deal on the HMI and the complete Mitsubishi Software Suite the local Mitsi guru said that was all I needed to get the job done. But afetr delving into what came inthe box it seems I need a A - Q Conversion Support Tool https://www.mitsubishielectric.com/fa/products/cnt/plca/pmerit/renewal/case/support_tool.html

However I cannot find the software on any of the DVD's that I have and I cannot seem to find a download.

So I am stuck now.

Can anyone help point me in the right directon? Any Help greatly appreceiated.

Thanks in advance.

 

 

[Thiago Turcato 11]

Hi,

Here it is the software you mentioned: https://www.mitsubishielectric.com/dl/fa/software/update/plc/0000000273/sw1d5n-aqcnv-e_20.zip

Note that this software is used to compare the original A PLC program with Q PLC converted software for corrections or complements to the program originally converted using GX Developer.

The first step is converting the hardware by using the conversion guides:

A-Q https://drive.google.com/drive/folders/0ByjbLllAmf8CYmJrYVdCdVRBR0E

And/or

AnS-Q https://drive.google.com/drive/folders/0ByjbLllAmf8CMThfRHE4ekN4Unc

After that, you must convert existing PLC program by using GX Developer (included in iQ Works software suite). After that you use the conversion tool above.

Regards,

Thiago

[koelkommer 1]

Thank You Thiago for your assiatance I am aiming to start with this this week unless the usual breakdown stuff crops up. Once again thanks!