Posted 28 Oct 2019 Hi Guys, who knows about the new Software FactoryTalk Network Manager? I am trying to get the connection with a stratix 5700 but no success. I think i do not know how to really configure the network Manager so that it sees the switch. Now just for the test i have a LAN cable from switch (any port) to the host PC where Network Manager is installed; the IP of the PC is in the same range like the switch. Any ideas? thank you Share this post Link to post Share on other sites
Posted 28 Oct 2019 Is the subnet mask the same in both? Share this post Link to post Share on other sites
Posted 1 Nov 2019 Hi, thanks Michael for your Answer. The problem with with the Settings of the switch; you have to activate some protocols like SSH/SSC in the switch settings. My switch had an older Firmware version and so it was not possible to change anything because the switch does not support that. So i have tried with a new switch (Stratix 5700) and the communication worked properly. Thanks 1 person likes this Share this post Link to post Share on other sites