Posted 4 Sep 2019 Hi, Could anyone please help me to set a Counter SetValue on Omron CP1L PLC from Got2103 HMI. The Device register on Got2103 doesnt take registers such as D0, it takes DM0. But the 'CNT 001 DM0' instruction doesnt work in Omron PLC. So what should be the Device address on HMI and Counter Set Value register. I am new to both Omron and Mitsi Thank you Share this post Link to post Share on other sites
Posted 4 Sep 2019 The "D" and "DM" addresses should be interchangeable. If you enter a register as "D0" in the PLC then it should be "DM0" in the HMI. Share this post Link to post Share on other sites
Posted 14 Sep 2019 Thank you very much. It worked for me. Share this post Link to post Share on other sites