Posted 7 Aug 2019 Dear All, Anybody can help me in communication between Fatek 20MAR2 & CBEH2A. The jumpers setting are JP1 is on left two pins (No password protected) & JP3 is on right two pins (forced boot operation mode). The Ethernet cable i used is type b T568. Fatek Ethernet module config software detecting module successfully (shown in attached pic) but on online PLC via ethernet cable its showing connection failed. please help thanks in advance Share this post Link to post Share on other sites
Posted 29 Sep 2019 Hi Yasir_66 Can you check in Port1 Com. Parameters Baud Rate must be : 115200 Share this post Link to post Share on other sites
Posted 30 Sep 2021 Have you tried resetting the CBEH2A to default setting? Default IP would be 192.168.2.3 After reset you can access it online Use TCP as protocol Share this post Link to post Share on other sites