Posted 2 Aug 2019 IS IT POSSIBLE TO DO A HTTP REQUEST (get/post) IN A Mitshubishi PLC Share this post Link to post Share on other sites
Posted 2 Aug 2019 Not that I am aware of. But then you also didn't say what Mitsubishi PLC and there are dozens of them. Share this post Link to post Share on other sites
Posted 5 Aug 2019 In a FX5u cpu with a fx5-enet module. Share this post Link to post Share on other sites
Posted 3 Dec 2022 As far as I know, accessing PLC through ajax is not a routine operation. If you can, you can try LECPServer, an open source middleware. It can expose the PLC node address for reading and writing through HTTP POST. https://github.com/xeden3/LECPServer Share this post Link to post Share on other sites
Posted 3 Dec 2022 10 hours ago, xeden3 said: It can expose the PLC node address for reading and writing through HTTP POST. That's nice, but it seems to be opposite direction of the OP's question. Share this post Link to post Share on other sites
Posted 4 Dec 2022 12 hours ago, pturmel said: That's nice, but it seems to be opposite direction of the OP's question. Sorry, indeed I misunderstood the question But as far as I know, there is no PLC that can implement the Restful protocol. After all, this protocol requires a more complicated link mechanism and CPU resources. The more common practice is that the link end mainly writes to the PLC. Share this post Link to post Share on other sites