REMOVING FORCE CONDITION ML 1500

[jose7771 0]

HI DURING MY LAST VISIT TO ONE OF THE SITE,IWAS RECEVING SOME OF THE INPUTS FROM DCS SIDE , BUT SINCE DCS ENGINEERS WERE NOT AVAILABLE I WAS FORCING THOSE CONDITIONS , BUT UNFOTUNATELY WHILE LEAVING I DIDNT REMOVE THE FORCE CONDITIONS , PLC I AM USING IS ML 1500 (1764-24BWA) NOW THE CLIENT WANTS TO REMOVE ALL THE FORCE CONDITIONS TO HOOK UP TO DCS,IS THERE ANY WAY TO REMOVE THE FORCE CONDITIONS WITHOUT USING LAPTOP OR PC , THAT IS THROUGH SOME H/W SETTINGS REGARDS JOSE

[mgvol 0]

No, you're going to have to go online with the processor and remove the forces.