Connect to PLC through GOT HMI

[kevspark 0]

Yes tested the ping from the HMI utility

[kevspark 0]

If I install a network switch I can connect without any issues. When I detect the device using External Device Detection it finds the HMI but states that theres no profile for it? Such a pain in the ***. 

[Ekke 1]

Aren't you missing Ethernet configuration for GOT in FX5?

Here is my setup with GS panel:

[Gambit 324]

Sorry for the late reply I was on holiday.

There are two ways to connect a Got terminal to the PLC. Via SLMP or melsoft connection.

When you have selected the iQ-F driver then you need an melsoft  TCP port.
If you select SLMP than you need the SLMP port and enter a port number on both sides.
 

Edited 12 Aug 2019 by Gambit