kurdapyu

Melsoft Series GX Develop Error

16 posts in this topic

Good day everyone. 

Somebody can help me to to resolve the issues in our PLC. I am not a PLC engineer, your help will be highly appreciated.

It is showing -

Failed to open the Project file. 

Possible causes: 1.The data in the project file is completely damaged; 2.The data is created by new version more than this S/W; 3.The project file does not exist.

Hopefully, somebody can help me or give instruction on how to check those possible causes.

 

Thank you.

PLC error.jpg

Edited by kurdapyu

Share this post


Link to post
Share on other sites

Which version of GX are you using ?

Share this post


Link to post
Share on other sites

that's not to old. You should also check if files are read only.

 

Share this post


Link to post
Share on other sites

If you are opening this directly from windows explorer...make sure you are opening the right file (from memory there are a .gpx and a .gpxx file) this error normally happens when you open the wrong one.

Alternativley upload your program and I can check for you.

 

 

Regards

Daniel

Share this post


Link to post
Share on other sites

thank you everyone for your response.

i think i am opening the right file. because once i click the project button, there are portion for recently open program.

and when i click the file/program. it display the error "Failed to read the project file" as shown in the first photo.

Thanks again.

PLC Error2.jpg

Edited by kurdapyu

Share this post


Link to post
Share on other sites
56 minutes ago, kurdapyu said:

thank you everyone for your response.

i think i am opening the right file. because once i click the project button, there are portion for recently open program.

and when i click the file/program. it display the error "Failed to read the project file" as shown in the first photo.

Thanks again.

PLC Error2.jpg

Please upload your program and I will check for you....

 

Regards

Daniel

1 person likes this

Share this post


Link to post
Share on other sites

Version 8 doesn't tell us enough.  What is the full version number?  There's been over 115 releases of version 8.

The project may be from a newer version.  It may have files missing.  It may be tagged read only in Windows.  There's a hundred different things that it could be.

Please provide more detail on the version and PLC type.

1 person likes this

Share this post


Link to post
Share on other sites
On 6/18/2019 at 10:14 AM, collinsd70 said:

Please upload your program and I will check for you....

 

Regards

Daniel

Sir Daniel, 

I think the program was still there but cannot be open. highlighted with red line is the recently open program which properly working before.

And when I open the .gps type of file it display that "failed to read the project file"

recently open program.jpg

program.jpg

Share this post


Link to post
Share on other sites
21 hours ago, Crossbow said:

Version 8 doesn't tell us enough.  What is the full version number?  There's been over 115 releases of version 8.

The project may be from a newer version.  It may have files missing.  It may be tagged read only in Windows.  There's a hundred different things that it could be.

Please provide more detail on the version and PLC type.

PLC is MITSUBISHI

GX Version.jpg

Edited by kurdapyu

Share this post


Link to post
Share on other sites

Well if you're using GX-Developer, there's about a 100% chance the PLC is Mitsubishi.  Which one?  They make quite a few.

Are there files and subdirectories in the Resource project folder?

Are these files not marked as read only?

 

1 person likes this

Share this post


Link to post
Share on other sites

Good day.

Yes, it is MELSEC Q61P if I'm not mistaken.

Yes I think so there are files.

All files are marked as read only except for the program files.

Please see photos for reference that might help.

Thank you very much. Your help is well appreciated.

photo_2019-06-20_09-31-20.jpg

PLC1.jpg

PLC2.jpg

PLC3.jpg

PLC4.jpg

PLC5.jpg

Share this post


Link to post
Share on other sites

Ok you have a system Q (Q02HCPU).
Project files are for GX Developer.

I would select all the files and remove the read only checkmark and then try again.
If it still won't open maybe you can share the project so we can try.

If you want to download the update for GX Developer:
http://www.mitsubishielectric.com/fa/download/software/index.html

Share this post


Link to post
Share on other sites
4 hours ago, Gambit said:

Ok you have a system Q (Q02HCPU).
Project files are for GX Developer.

I would select all the files and remove the read only checkmark and then try again.
If it still won't open maybe you can share the project so we can try.

If you want to download the update for GX Developer:
http://www.mitsubishielectric.com/fa/download/software/index.html

We do as you say but still it won't open. 
Herewith is the copy of the program. 
Please check if you can try to do something about it. 
Thank you. 

Gppw.gpj

Gppw.gps

Project.inf

ProjectDB.mdb

Gppw.gpj

Gppw.gps

Project.inf

ProjectDB.mdb

Share this post


Link to post
Share on other sites

sure but Can you just zip the complete project including the resource folder and then attach it ?

Share this post


Link to post
Share on other sites

As stated we need the complete program, the files you have sent are only part of the program structure, the RESOURCE folder is missing. I have managed to open the file using a substitute RESOURCE folder but obviously the program isn't correct.

Steve

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now