SSK

Need a Stepper drive that can run without pulse input

5 posts in this topic

In One of my machine we using one stepper drive thatCTA2H328M-MB model made by Centrust Motors China running without pulse input.Direction and  Enable input only connected. My problem is motor running in low speed since drive is 2.89 Amps and motor is 4.2 Amps so its not supporting.I want change drive capacity but i couldn't found a drive with same concept.I couldn't able to reach the chinese vendor.?c=msg&id=2337I have tried many drives which is in my stock all are enable input used for enable/Disable the drive.I am bit confuced.

http://www.centrust-motor.com/?c=msg&id=2337

Kindly help

what type of drive is this?

Which model will suitable for my requirement?

 

ae03f5041be746fc6.jpg

Share this post


Link to post
Share on other sites

@SSK I think you need to seperate devices for Pulse Generator and Stepper Motor Drive.  For Pulse Generator you can use any microcontroller board or PLC to create fix pulse for motor speed then connect it to stepper motor drive input that you can select any drive for suitable with stepper motor current.

Example of simple pulse generator.

https://www.yoycart.com/Product/38932026153/

http://www.99automation.com/pro37.htm

Edited by Wasan
Add example

Share this post


Link to post
Share on other sites

Hi Wasan,

Thanks for the reply. For knowledge purpose does we have any similar stepper drive in market which has inbuilt Pulse generator. What is the type of concern drive.

 

 

Share this post


Link to post
Share on other sites

@SSK I have never heard of stepper motor drive that come with pulse generator almost receive pulse from PLC or motion controller.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now