Posted 25 Feb 2019 Hello all I have OMRON PLC CP1E-E10DR-A. I installed CX programmer , where I unable to connect the PLC.Driver successfully installed. In the software , i unbale to connect, there is no option for choosing E10DR, Th software has option of choosing E20 and above. Can anybody help in this? Thanks Share this post Link to post Share on other sites
Posted 25 Feb 2019 The E10 appears in my list. When you select CP1E it defaults to E20 - roll up the selection box and you should find it. Share this post Link to post Share on other sites
Posted 26 Feb 2019 Thanks Mr.BobB In my computer I have installed CX Programmer V1.0. Is this correct software?. I donot find the option for choosing E10. More over My PLC is detected in Windows 10 OS but, The Cx Programmer V1.0 does not connect the PLC. Please suggest some idea. Thanks Share this post Link to post Share on other sites
Posted 26 Feb 2019 CX-Programmer is up to version 9.6x. If you have loaded version 1, it will not run correctly in Windows 10. gtsuport 1 person likes this Share this post Link to post Share on other sites
Posted 27 Feb 2019 (edited) As Bob mentioned, is it possible that you just need to scroll up? When you first open the dialog, it only shows 20 and up. Edited 27 Feb 2019 by IO_Rack Share this post Link to post Share on other sites
Posted 27 Feb 2019 IF he really has version 1 of CX-Programmer, that only supports CS1. CP1E requires at least version 8.2 or above. Share this post Link to post Share on other sites
Posted 27 Feb 2019 Thanks for your valuable reply. I try to install version 8.2 and above. Share this post Link to post Share on other sites