Posted 22 Feb 2019 Hi, I am currently programming an E1043 screen for a cooker program, however, although when tested the program is valid I cannot seem to be able to migrate active alarms to the alarm page (990). When I try and add alarms and type 990 in info block I get an error saying the block is invalid. Any suggestions please? Thanks in advance Share this post Link to post Share on other sites
Posted 22 Feb 2019 Hi Janian21, The link below lead you to the E100 terminal manual (in pdf). In chapter 8 the alarm handeling is described. I hope this will help you out fixing this problem. Best regards, Theo V. https://www.google.nl/url?sa=t&rct=j&q=&esrc=s&source=web&cd=6&ved=2ahUKEwjfjsOhvdDgAhVJzqQKHZbxDX4QFjAFegQIBBAC&url=https%3A%2F%2Fwww05.beijerelectronics.com%2FAPI%2FSharePointFileByKnowledgeBaseIdAndIndex%2F97BF7EDEA36A424994A97BB1A30BEEAA%2F0&usg=AOvVaw32QhLGuQrHLDFi3aa-BmF5 Share this post Link to post Share on other sites
Posted 23 Feb 2019 Hi Theo V. Thanks for the info, I'll give it a try Regards Share this post Link to post Share on other sites