Posted 5 Jun 2018 I'm coming from AB and Automation Direct and I guess to assume they would even be remotely similar was a joke. In AD I have the ability to pull up a recipe on the HMI with the Part number (Vertical column) and different attributes of the part in the following 5 columns (derived from tags in the PLC). How do I replicate this in GT Designer 3? I'm utilizing GX Works 3 with it. I have a recipe record box on the HMI screen thats visibility is based on a tag in the PLC. How do I make it do the same thing has previously described? Going through the settings of the Recipe Display, I can't find any place to add the columns based on the tags. It seemingly gives you very limited options in the settings. Has anyone had better experience with this that can point me in the right direction? Thanks in advance! Share this post Link to post Share on other sites
Posted 6 Jun 2018 See example attached Recipe_V_Ver2b_E.GTX Recipe_V_Ver2b_E.pdf Share this post Link to post Share on other sites
Posted 6 Jun 2018 (edited) 15 hours ago, Gambit said: See example attached Recipe_V_Ver2b_E.GTX Recipe_V_Ver2b_E.pdf Thanks for sending these. I'll take a look. After reading through this I have unanimous confirmation that you are a godsend. Thanks for this!! Edited 6 Jun 2018 by Dbanks Share this post Link to post Share on other sites
Posted 6 Jun 2018 17 hours ago, Gambit said: See example attached Recipe_V_Ver2b_E.GTX Recipe_V_Ver2b_E.pdf Is there any necessity to the use of so many of the GDXXXX format? A lot of what I'm editing is in D, and there's definitely a method to the madness I might just be missing. Thanks in advance. Share this post Link to post Share on other sites
Posted 7 Jun 2018 (edited) haha glad to be able to help No worries this is just an extensive example. Al you need to use basically is the recipe settings and Recipe Display. The GD register are just local devices you can use D registers Edited 7 Jun 2018 by Gambit Share this post Link to post Share on other sites
Posted 8 May 2019 On 6/6/2018 at 11:37 AM, Gambit said: See example attached Recipe_V_Ver2b_E.GTX Recipe_V_Ver2b_E.pdf I was simulated this example recipe screen. If i change the "Record Number" from 20 to 50, simulation is not working. It doesn't show any data's in "Recipe Display". Is there any separate setting is available to change the Record Number. Kindly give suggestion. Share this post Link to post Share on other sites
Posted 1 Mar 2020 Hi all, İ need 11 block and 200 record, recipe display. 2 string and 9 real value. But if ı set this settings i get "failed to read recipe" error. What should i do? Can you help me please? Share this post Link to post Share on other sites
Posted 5 Mar 2020 On 3/1/2020 at 11:58 PM, Ceremonds said: Hi all, İ need 11 block and 200 record, recipe display. 2 string and 9 real value. But if ı set this settings i get "failed to read recipe" error. What should i do? Can you help me please? Maybe when you run HMI it load data from old recipe file. Try to delete old file and retry. Share this post Link to post Share on other sites
Posted 20 Oct 2020 On 5/8/2019 at 3:55 PM, soundararajan said: I was simulated this example recipe screen. If i change the "Record Number" from 20 to 50, simulation is not working. It doesn't show any data's in "Recipe Display". Is there any separate setting is available to change the Record Number. Kindly give suggestion. if i am putting write trigger=gs60100 then my GTdesiner shows invalid out of range popup. please help me out with this . Share this post Link to post Share on other sites
Posted 21 Oct 2020 If your post is correct you are using the GOT Special Internal device (GS) these only have a range of 0 -2047 (depending on the display type), You should be using GD (range of 65535) Steve Share this post Link to post Share on other sites
Posted 14 Feb 2022 On 6.06.2018 at 8:07 AM, Gambit said: See example attached Recipe_V_Ver2b_E.GTX Recipe_V_Ver2b_E.pdf Can you upload again this? I can't download 1 person likes this Share this post Link to post Share on other sites
Posted 14 Feb 2022 35 minutes ago, rem1 said: Can you upload again this? I can't download Recipe_V_Ver2b_E.GTX Recipe_V_Ver2b_E.pdf 1 person likes this Share this post Link to post Share on other sites