E1032 switching run-prog without laptop

[Theo V 17]

Hello all,

I need to change the IP setting of a Beijer MAC E1032 text terminal (HMI) without a computer or e-designer software available on location. I know there was in the E100 series a two-button combination to switch manually from run to prog (arrow+home) however it did not work on a E1032 series terminal. This is an other combination but I just forgot what it was because normally I always use the PC for this. Anyone has the answer wich combination it is? Thanks in advance for your help.

 

Best regards,

Theo V.

[Inntele 60]

Hi Theo,

For E1000-series the mode is selected by mode switches. http://omniray.ch.sabon.ch-meta.net/tl_files/Katalog/Handbuecher/Steuerungs-UndRegeltechnik/HMI_Bediengeraete/E-Terminal/E1000-Series/HardwareManuals/E1000-Series_ServiceMaintenance_MA00758A.pdf , page 24

[Inntele 60]

http://www.cdluk.com/cable-wiring-guides/how-to-e1000-hmi-dip-switches/

[Theo V 17]

Hi Inntele, this is exactly what i need! I will try this DIP switch setting 1000 as soon as i return to my workbench.

thanks and  best regards

Theo

UPDATE: Today I've made a test setup on the workbench. The DIP switch settings were a very easy way to change the network settings, worked fine!

Thanks again Inntele!

Regards,

Theo V.

Edited 28 May 2018 by Theo V
Update on information