Posted 10 Apr 2018 (edited) Hello i have faced problem with connecting to Premium plc TSX572623. I don't have RS485 cable for AUX or TER port on that plc. Plc has ETY Port, but my attempts to connect with it was unsuccsesful. I tried use 2 software: 1) Unity Pro XL 11, in this software i found tcp/ip communication, made test connection from driver manager, plc had link. But when i trying go online unity informed that plc was busied or something. I have checked Unity PRO XL 11 don't have in hardware configuration model of this PLC. I think problem with it. 2)I found old software PL7 and owner of this plc gave me *.stx project of it. PL7 have model of this plc in hardware configuration, but i didn't find how to connect via ETY port. In menu "define plc address" i can choose only UNTLW01 driver. I had googled before writing this post and found that i need XIP driver. But i can't find this driver on Schneider electric web site. Where i can get this XIP driver and how properly set parameters for reaching connection? Edited 10 Apr 2018 by Clear.Mind Share this post Link to post Share on other sites
Posted 12 Apr 2018 Hi, 1) Forget Unity, your processor is PL7-Pro only. For Unity only processors reference that ended by a 4 (ie TSX572624) can be programmed with unity. 2) XIP driver is installed when you install PL7-Pro. XIP Driver is provided as well on the cd with PL7-Pro. To configure XIP driver have a look here : https://www.schneider-electric.fr/fr/faqs/FA17522/ Sorry it's in french, I didn't find something in english. But it's not so complicated. Anyway a quicker solution will be to find an RS485 cable to connect the TER plug, it's easier than in Ethernet with these processors. JC Share this post Link to post Share on other sites