NS terminal

[Andrey Zhuk 0]

I have NS12 connect to PC through Ethernet. FTP ENABLE. NS_Designer v5.0. My questions: 1) What setting necessary for PC to have access to NS through the Internet? 2) That new in NS_Designer v6?

[Guest björn Jacobsson]

Hej Om du har problem med din NS skärm, kjontakta oss på Omron. 08 632 35 00

[Andrey Zhuk 0]

How to read from the PC $B and $W from NS ?

[Jay Anthony 118]

Use a FINS comand just like to a PLC. Treat $B as CIO and Treat $W as DM. Use this utility as a tool. FINS UDP for Ethernet @ MrPLC.com

[Andrey Zhuk 0]

Thank Jay.

[Andrey Zhuk 0]

How to bypass limitation in 50 “Always” Log Address Total?

[Jay Anthony 118]

Upgrade to Version 6 to make it 5000. Must have V1 hardware.

[Andrey Zhuk 0]

As always thanks Jay

[Andrey Zhuk 0]

Have connected NS12 through Ethernet port to a factory network. On the server the program (the design in CX-Supervisor) for data acquisition from the terminal is executed. All worked without problems. Something happened with the server. The server have restored. The server works, and the terminal has ceased to respond the program for data acquisition. Tried to reload both the server and the terminal, through CX-Net.exe opened the cdm-file and tried to open the terminal both through Ethernet and through Finsgateway in Network. Result one - connection failed. On ftp the terminal opens. There are any ideas? Sorry my bad english