Posted 31 Oct 2017 I've got an old Modicon PLC E984-265 that was programmed with Concept V2.2 SP2 program. If I have Concept V2.5 or 2.6 can I upload the program to my computer using a new software program? Thanks. Share this post Link to post Share on other sites
Posted 31 Oct 2017 You need *.asc file for import to other version of Concept. Share this post Link to post Share on other sites
Posted 31 Oct 2017 But reading from the PLC should work fine. Share this post Link to post Share on other sites
Posted 31 Oct 2017 Any way of getting the .asc file without having the correct version of Concept. I found V2.2, but not V2.2 SP2. Crossbow - So I should be able to connect up to the PLC with Concept V2.6 and do an upload? Share this post Link to post Share on other sites
Posted 31 Oct 2017 Anyone have Concept V2.2 SP2 that can export my project for me? Share this post Link to post Share on other sites
Posted 2 Nov 2017 You should have no problem getting online with the PLC with a newer version of Concept. Then you can transfer from the CPU unless the original programmer did not download the source code. I don't still have version 2.2, but you may still be able to find the service pack file to update yours to Service Pack 2. Share this post Link to post Share on other sites
Posted 3 Nov 2017 On 10/31/2017 at 2:17 PM, Korvettes said: Anyone have Concept V2.2 SP2 that can export my project for me? (deleted - was moderator mistake) Share this post Link to post Share on other sites
Posted 27 Nov 2017 I have this same problem, an application developed in 2.2 without the .acc file that I need to change some functionalities. Schneider's support in Brazil does not have the software version Share this post Link to post Share on other sites
Posted 27 Nov 2017 FOR MODERATORS: IT IS NOT A PIRATED SOFTWARE! IT IS ONLY A FREE UPDATE SR2 FOR CONCEPT 2.2! https://cloud.mail.ru/public/7KRg/R8Z2Tjj7W Share this post Link to post Share on other sites