PAC3200 and Omron HMI (NB7W-TW01B) and PLC communication Problem.

[Sourav Sau 0]

Sir,

I connected my Omron HMI(NB7W-TW01B) to my Laptop and I am trying to display the PAC3200 voltage, Current, Power Factor, KW value, Freq value in the HMI. But I could not understand what the address I will give in HMI so that it will show the value of voltage from MFM (PAC3200) to HMI. And I am using a RJ45 Ethernet port in PAC3200 and also in HMI.

Please  tell me the process how I will put the address and where  I will get the address for different parameter like voltage, Current, Power Factor ... etc.

 

Edited 24 Oct 2017 by Sourav Sau
Picture Attached additional

[Michael Walsh 268]

The addresses will be Modbus register addresses that you will need to get from the manufacturer of the PAC3200.  Make sure that in the communications settings for the NB HMI, that you have the Modbus protocol selected.  It is not selected by default.  See below: