Posted 21 Aug 2017 Hello, I have a problem in mitsubishi E600. The problem is when power on the hmi it is stuck in booting screen (i.e booting file system). so, i wanted to update the firmware in hmi. how to update the firmware. Please explain... Share this post Link to post Share on other sites
Posted 21 Aug 2017 Maybe you are considering Beijer's HMI E600. What software do you try to load the new firmware? Share this post Link to post Share on other sites
Posted 21 Aug 2017 You need to contact your nearest Beijer Electronics department to get the firmware loader and file. Check out their website: https://www.beijerelectronics.com Share this post Link to post Share on other sites
Posted 23 Aug 2017 I dont know the software to update firmware.please tell which software can i used to update the firmware. Share this post Link to post Share on other sites
Posted 23 Aug 2017 (edited) These HMIs are programmed with an E-designer. I'm not sure what version your terminal supports. You can try with v.7.30 or 7.52. This software can also be updated with firmware HMI. Edited 23 Aug 2017 by kraykov Share this post Link to post Share on other sites
Posted 9 Sep 2017 You can update the firmware in HMI with E-Designer v. 7.52 . E-Designer_for_E-series_English.pdf Share this post Link to post Share on other sites
Posted 9 Sep 2017 @CJ2M2016: Are you providing these software packages listed in the website (http://www.isansanat.ir/portfolios/mitsubishi/mitsubishi-electric/) free of charge? Please note that publishing and/or sharing installation codes and software packages that are supposed to be paid for is not allowed in this forum, and you will get warnings/banned for doing so. 1 person likes this Share this post Link to post Share on other sites
Posted 10 Sep 2017 I removed the download link. Do not share links to illegal software or you will be removed from this website. Share this post Link to post Share on other sites