Posted 4 Aug 2017 Hi,, i really newbie in Mitsubshi PLC,s. Currently i has a FX1s-10MR PLC.. I have gx works 2 software.. its possible i go to up/download/read prog inside? If can, what cable is suitable for it? currently that cpu has sc09 cable connected to controller. Share this post Link to post Share on other sites
Posted 4 Aug 2017 Yes you should be able to upload download using GX Works 2 and the SC09 Share this post Link to post Share on other sites
Posted 17 Aug 2017 another questions... how many count of this counter..i really still cannot understand this plc language:( Share this post Link to post Share on other sites
Posted 17 Aug 2017 7 minutes ago, Some one said: how many count of this counter..i really still cannot understand this plc language:( What counter? Please be more specific in your questions. Share this post Link to post Share on other sites
Posted 21 Aug 2017 If you are asking what your maximum counter counts are this is what I found in my manuals: Setting ranges for counters: • 16bit counters: -32,768 to +32,767 • 32bit counters: -2,147,483,648 to +2,147,483,647 Share this post Link to post Share on other sites
Posted 22 Aug 2017 (edited) The colleague kaare_t has in mind what sensor will count impulses this counter - encoder, photosensor and more. Also, the speeding up of the process is important. Edited 22 Aug 2017 by kraykov Share this post Link to post Share on other sites