Posted 10 Jul 2017 (edited) Hi guys ,i hope you can help, iam trying to monitor a project on softgot 2000 created with gt designer 3 and connected to an fx32 and also tried with an AS CPU plc. ive setup all comms. when i start to monitor it comes up with the message" https://ufile.io/1cz20 is it possible thanks iam trying to use my PC as a HMI and talk to an As1cpu ,using softgot 2000 ,firstly do I have to be connected to the Plc before I open softgot ? or can open softgot ,load the application and then connect to the Plc .I've tried both ways and this is when I get the message that the got type resolution of the project is different from the one specified in the gt softgot2000. I've changed the resolution the project and although matched ,I still get the same message. I've tried gt softgot2000 commander to setup comms and environment .ive read the manual but still can't get it right,please help. thanks Edited 13 Jul 2017 by gerdam Share this post Link to post Share on other sites