Posted 16 Apr 2017 I have fxg3 and fx3s Mitsubishi PLC and gx developer software ver.7 ,my question what is the suitable software and cable to connected with pc Share this post Link to post Share on other sites
Posted 16 Apr 2017 GX Works2 supports both of them and is the latest software package available for those units. 1 person likes this Share this post Link to post Share on other sites
Posted 18 Apr 2017 USB Mini-b (5-pin) Cable is the easiest, cheapest, and most available. A Mitsubishi SC-09 or 3rd-party alternative will also work, but you'll need a serial port on your computer. 1 person likes this Share this post Link to post Share on other sites
Posted 9 May 2017 The third party alternatives are an ify proposition. The ones I have used are spotty and sometimes fail completely. I finally purchased a Mitsubishi SC-09 and all the problems vanished. Just my humble. Share this post Link to post Share on other sites
Posted 9 May 2017 I have used the SC-09 cables from www.plccable.com for the last 8 years or so and never had an issue. I mostly use the cheaper version without a dedicated RS422/RS232 converter, but I also have one of the full versions, and it works just as well. I think most other cheap knockoffs do not have the dedicated converter, and so the quality of the components can make a big difference in how well it works. 1 person likes this Share this post Link to post Share on other sites