Posted 8 Apr 2017 (edited) is it possible to overwrite the linked word coming from the other station as stated in this refresh parameter? http://prnt.sc/etejvj I will do OUT W703.11 which is written in the station 3 but I dont have access to it so I am asking if this is possible. Edited 8 Apr 2017 by CMike Share this post Link to post Share on other sites
Posted 10 Apr 2017 I haven't tried doing that, but I suspect it will let you write to the register, but the CC-Link refresh will overwrite it immediately. Share this post Link to post Share on other sites
Posted 10 Apr 2017 but isnt it read/write meaning its a two communication between the station as long as no one is writing on the other side it is fine Share this post Link to post Share on other sites
Posted 11 Apr 2017 The slave is passive, which means it just has the data available. The slave doesn't report data change to the master. The master has to read the data on a set cycle. So you can write to the register in the PLC code, but it will be overwritten at the next read cycle. Share this post Link to post Share on other sites