Posted 19 Mar 2017 I was using AIC converter to connect two SLC 500 plc and from AIC convert i used to connect my PC for monitoring of ladder logix. but now my old PC HHD corrupted and i installed RSLogix and Rslinx in new pc but Now in rslinx 1747-pic/aic+ driver not available please help me how to fix it..... Share this post Link to post Share on other sites
Posted 19 Mar 2017 (edited) Please tell us the SLC you have SLC5/01,02,03,04,05? Asking about the 1747-PIC driver would indicate you are trying to connect to a DH485 network. Some of the newer versions of RSLinx do not have that driver. As most new PC's do not have a real serial port needed for that driver. You would be better off getting a 1747-UIC ( USB to DH485 converter) See link http://www.plccable.com/allen-bradley-1747-uic-usb-to-dh485-usb-version-1747-pic-slc-500/ Edited 19 Mar 2017 by Mickey Share this post Link to post Share on other sites
Posted 20 Mar 2017 Also what is your Windows version and SP level as this also will effect the AIC driver. Alan Share this post Link to post Share on other sites
Posted 9 Apr 2017 OK thanks Now please tell me how to configure DH485 convert to pc. Share this post Link to post Share on other sites
Posted 9 Apr 2017 7 hours ago, kumarsaurab92@gmail.com said: OK thanks Now please tell me how to configure DH485 convert to pc. You would be better off getting a 1747-UIC ( USB to DH485 converter) See link http://www.plccable.com/allen-bradley-1747-uic-usb-to-dh485-usb-version-1747-pic-slc-500/ Share this post Link to post Share on other sites
Posted 10 Apr 2017 Just now, kumarsaurab92@gmail.com said: Thanks. My problem solved And the solution was? Share this post Link to post Share on other sites