Posted 17 Mar 2017 Hi, i'm a newbie in plc programming, i've started to learn recently. I have written a program by Rslogix 5000, but my tutor want me to build a HMI using Advanced HMI for simulation. Searching on goggle seem to be hopeless now, it would be thanksful if anyone can show me how to link RSlogix 5000 program with AdvancedHMI step by step, especially, i'm stuck at register IP address, port, com. Thanks for your reading! Share this post Link to post Share on other sites
Posted 17 Mar 2017 RSLogix 5000 Emulate does not communicate over TCP/IP like true controllers do. It can only communicate with the RSLinx Classic and RSLinx Enterprise communication drivers via its virtual backplane. If you have RSLinx Classic with a licensed activation that provides OPC DA Server functionality, you may be able to use the OPC DA Client driver in AdvancedHMI. 1 person likes this Share this post Link to post Share on other sites
Posted 18 Mar 2017 thanks for your concern. I will try out your solution Share this post Link to post Share on other sites