Posted 25 Jan 2017 (edited) Hello I want to do automatic weighing with the information from 0-10V LoadCell card on FX2N-4AD analog card. I tried to do the current program by using help manual from the user manual. LoadCell is connected to the reservoir by means of 2 pistons. For example, we want to package 50kg product. For this, we should make 1piston setting 45kg. 2.piston 1.Piston is closed and when it is 50kg, FX2N-4AD.rar Edited 25 Jan 2017 by mekatronik45 Share this post Link to post Share on other sites
Posted 25 Jan 2017 Load cell can send a sample project Share this post Link to post Share on other sites
Posted 26 Jan 2017 Can you send us the Datasheet for the LoadCell? Share this post Link to post Share on other sites
Posted 30 Jan 2017 Dear Andrei, Thank you very much for your help. Loadcell module manual http://www.hbm.com.pl/pdf/a0114.pdf English is not very good I use google translator I hope you understand me. Best regards. Share this post Link to post Share on other sites
Posted 30 Jan 2017 (edited) I have looked over the manual. try writing like this at the beggining: M8000-------------------------TOP K0 K0 H3300 K1 ( The analog input channels (CH1, CH2) are setup by writing H3300 to the BFM #0 of the FX2N-4AD.) -------------------------TO K0 K1 K4 K2 (sets the number of average samples to 4 for CH1 and CH2) --------------------------FROM K0 K5 D0 K4 (Here i'm not sure if K4 is correct. I would try with K2 first). Try this and tell me if it works Edited 30 Jan 2017 by Andrei Blagaila Share this post Link to post Share on other sites