Posted 20 Jan 2017 Hello, I want to ask if anyone have experience on this. So I want to mount C200H-LK401 combined with CS1 PLC. But the PC Link communication is meant to be done with another C200H PLC using C200H-LK401 also. Now the thing is, in CS1 PLC, LR Address Area is converted to CIO 1000 and so on. Will the PC Link still works to C200H? Like CIO 1000 from CS1 will be mapped to LR0 in the other C200H. Thanks in advance Share this post Link to post Share on other sites
Posted 20 Jan 2017 @Jay Anthony just mentioning you here in case you know something about it, since I saw you posted similar things in PLCTalk before. Sorry to disturb :D Share this post Link to post Share on other sites
Posted 20 Jan 2017 LR is old - go to a modern PLC system and use CX-Integrator. Just doing that at thje moment 0on a big job. I do not think that will work but Jay will know. Share this post Link to post Share on other sites
Posted 20 Jan 2017 Just now, BobB said: LR is old - go to a modern PLC system and use CX-Integrator. Just doing that at thje moment 0on a big job. I do not think that will work but Jay will know. Hi @BobB. Yes, actually I intended to replace it to ControllerLink instead of keeping the old PC Link. But the customer is against it at the moment. Share this post Link to post Share on other sites
Posted 20 Jan 2017 It will work. The CS1 will use CIO1000-CIO1063. The C200H will use LR00-LR63. (Done it before.) 1 person likes this Share this post Link to post Share on other sites
Posted 21 Jan 2017 13 hours ago, Jay Anthony said: It will work. The CS1 will use CIO1000-CIO1063. The C200H will use LR00-LR63. (Done it before.) Thanks for confirming Jay, gonna go on with it now :D Share this post Link to post Share on other sites