Posted 27 Nov 2016 (edited) Hello Im new using HMI got1000, Im trying to connect using Ethernet this HMI to a compactlogix, i already imported the tags, but i can't use any of them, because the gtworks3 says "you have to map the tags for set a device", i dont know what means map the tags, some one can help me please? Edited 27 Nov 2016 by Omar_ri_pre Share this post Link to post Share on other sites
Posted 27 Nov 2016 (edited) As i understand you need to get associating tags with the device. . Read GT Designer3 Version1 Screen Design Manual (Fundamentals) chapter 9.3 Importing Tags Created by Third Party Programming Software You can find it GTD3 help/manual/index/ There is some picture from manual mb it can helps you. Also you can try to directly connect to plc memory. Read GOT1000 Series Connection Manual (Non-Mitsubishi Products 2) for GT Works3 Edited 27 Nov 2016 by Clear.Mind Share this post Link to post Share on other sites
Posted 27 Nov 2016 Yeah, i read all that information already, but i got 2 problems the first one i dont know how to map the tags, the second one the gtworks3 just read me bolean and int type, but the dint and real tags the gtworks3 doesnt read them, Im gonna upload my tags and some screens for show you Share this post Link to post Share on other sites
Posted 27 Nov 2016 1.In the first image when i try to import tags i got that message. 2.In the second image im trying to set one tag to a one button, but the tags are there but i cant select one of them, because i dont have a device name I attached my tags, i hope someone can help me rslogiix5000tags2.CSV Share this post Link to post Share on other sites
Posted 27 Nov 2016 (edited) I'm not familiar with AB, but i think problem in your CVS file. You made it wrong without plcmapping, as i understand your tags doesn't associate with memory cell (like In Mitsubishi Global variables without mit-addr - Refresh_all for example on pic.) So GTD3 don't know which one of memory cell need to read. Try to find some about plcmapping in RSlogix and make cvs again. I have found some doc about AB tags. Edited 27 Nov 2016 by Clear.Mind Share this post Link to post Share on other sites
Posted 27 Nov 2016 Yes, i know the problem is in the tags, but rslogix create the tags, thats the problem, so when the gtworks3 says "map" means the rslogix has to map the tags or i have to do that? Or what does map means? Share this post Link to post Share on other sites
Posted 27 Nov 2016 2 hours ago, Omar_ri_pre said: Yes, i know the problem is in the tags, but rslogix create the tags, thats the problem, so when the gtworks3 says "map" means the rslogix has to map the tags or i have to do that? Or what does map means? It's mapping of memory.When you connect directly without TAG you choose file type, file # and elements #. I have tried manually change your cvs accordingly with datasheet, but zero results. I think you have to make direct connection. Share this post Link to post Share on other sites
Posted 28 Nov 2016 I apreciate your help, I have to find the answer, Share this post Link to post Share on other sites