christophertedjo

Does anyone have a code for position control QD75D4?

7 posts in this topic

i need a example code for position control of MR-J3-20A with QD75D4 as intelligence module.

and i want to see the parameter if possible

 

Share this post


Link to post
Share on other sites

Hi,

Which software are you using? GX developer or GX Works2?

If you are using GX Works, you can set up QD75D4 adding as a new module in intelligent function Module.

And you will need to write a code just for movement.

 

Edited by AlexMota

Share this post


Link to post
Share on other sites
14 hours ago, AlexMota said:

Hi,

Which software are you using? GX developer or GX Works2?

If you are using GX Works, you can set up QD75D4 adding as a new module in intelligent function Module.

And you will need to write a code just for movement.

 

hello. im have both software, but im currently using GX works2. 

i need a example code for movement. i am very new to PLC. i havent work with any plc yet. and is very hard to find free tutorial for this QD75d4

what kind of code do i need?

Share this post


Link to post
Share on other sites

i think is not so easy to start with motion system to beginners.

As you said, you haven't work with any plc yet.

To begin with some basic tutorials would be good idea.

Take a look in this link. It will help you a lot.

http://www.mitsubishielectric.com/fa/assist/e-learning/eng.html


returning to motion system. What you need to know:

Before to start a code, you will need to wire the cables according the only way to work a QD75D__ with  MR-J3__: Pulse train input . See the manuals.

After that , you wiil need to configure the amplifier using GX-Configurator software.

The next step in GX Works 2, add the QD75D_ as a inteligent function module and configure the module. You will need keeping in mind what kind of motion you want, all maths to gear relation and so on like you thinked your system
As i said , not too easy.

And finally the code you are talking about.
The last thing that you do  and the easyest ( if all your configuratios are ok). 

Share this post


Link to post
Share on other sites
On 11/4/2016 at 8:16 PM, AlexMota said:

i think is not so easy to start with motion system to beginners.

As you said, you haven't work with any plc yet.

To begin with some basic tutorials would be good idea.

Take a look in this link. It will help you a lot.

http://www.mitsubishielectric.com/fa/assist/e-learning/eng.html


returning to motion system. What you need to know:

Before to start a code, you will need to wire the cables according the only way to work a QD75D__ with  MR-J3__: Pulse train input . See the manuals.

After that , you wiil need to configure the amplifier using GX-Configurator software.

The next step in GX Works 2, add the QD75D_ as a inteligent function module and configure the module. You will need keeping in mind what kind of motion you want, all maths to gear relation and so on like you thinked your system
As i said , not too easy.

And finally the code you are talking about.
The last thing that you do  and the easyest ( if all your configuratios are ok). 

the wiring already done. i have configure the amplifier and plc parameter. 

 

thanks for your attention :)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now