Posted 16 Sep 2016 Hello, I use a MAD 42 ON A cj1m to produce a read out for a NS Screen measuring the current being drawn by a HV Power Supply that is used for electro statically covering tin plate with oil. The power supply failed the other day and a lot of sheets received no oil coverage. I need to devise a compare function that will activate if the current level falls to a minimum level. I use >(310) and <(320) in some of my programmes but dont think they will work on 16 bit binary. Can someone please tell me what function I can use to measure the INT function. Many Thanks Share this post Link to post Share on other sites
Posted 18 Sep 2016 Try i out in the simulater and if not make a convert from 16 binary to INT or use ther >S ¨Banker Share this post Link to post Share on other sites
Posted 18 Sep 2016 Thanks Banker. I intend to use the <S function. So my first value would be set at &1 and the second value that of the current reading is generally at -2 so hopefully the alarm bit will turn on if this value falls below 1. Unless you can see a easier way to do it. Regards Share this post Link to post Share on other sites