Posted 20 Nov 2002 (edited) Has any one put a 5/01 or 5/02 on to an ethernet conection I was thinking of using an isolated link coupler then a 1761-NET-ENI unit .As we have 2*5/01's ,1*5/02 ,10*5/03 , 1*5/05 and 1*micrologix 1200 scatered about the site the hope is to get them all networked to one standard the furthest points are about 1500m apart.Any help would be great.. Thanks Jezz Edited 20 Nov 2002 by Jezz Share this post Link to post Share on other sites
Posted 21 Nov 2002 I asked a similar question and found this for a 5/03, you may want to check into it for compatability with 5/01 and 5/02. MVI46-DFNT will Information can be found at the following page: http://www.prosoft-technology.com/prodinfo.cfm?pid=404 Share this post Link to post Share on other sites