Delta DVP-10SX How to read analog value and display it at the built in 7 segment display

[RothmanDaLuck 0]

Hello, does anyone here know what instruction to use to read the analog value from ch0 and display the reading for DVP-10SX plc? I'm lost, need help.

[Bryll 31]

You will find the value of channel 0 at D1056 if I remember it correctly.

The raw value of the analog input will be 0-2000.

You must scale this value to fit the range 0-99 and write to D1196, then you'll see it at the small display as percent or whatever you scale it to be.