Posted 23 Mar 2016 I want to set up my PLC or PanelView to send me an email when we get x amount of process faults in x amount of time. The logic seems easy, use a running counter and timer to trigger a bit. I just need to figure out how to send me an email if that bit goes from 0 to 1. I have a CompactLogix L36ERM I also have been told that PanelViews can send emails. I have a PanelView Plus 6 700 run-time 8.0 that is connected to the same PLC. Is this something I can do either in the PLC program or in the PanelView program? They are both connected to our network and should be able to communicate with the mail server, I'm just not sure how to. I need a little bit of direction. Thanks Share this post Link to post Share on other sites
Posted 29 Mar 2016 There are examples inside the RA Knowledgebase. CompactLogix: https://rockwellautomation.custhelp.com/app/answers/detail/a_id/46036 Panelview Plus: https://rockwellautomation.custhelp.com/app/answers/detail/a_id/164511/ Hope this helps, - fuzzy logic Share this post Link to post Share on other sites