Posted 4 Feb 2016 I need for my project the user guide for ge power tools : Configurator, Concentrator and Viewer. Can someone help me ? Share this post Link to post Share on other sites
Posted 4 Feb 2016 I've been working with GE PLC/PAC and CNC since 1989 and have never heard of "GE Power Tool" does it go by some other name too? Have you tried searching the internet, I hear there is a lot of stuff out there. 2 people like this Share this post Link to post Share on other sites
Posted 4 Feb 2016 Those tools are dedicated to Substation's protection devices (IED) such as GE F640. Share this post Link to post Share on other sites
Posted 4 Feb 2016 Ahh-ha You reference Proficy Historian as used by GE Power. Try this: https://ge-ip.force.com/communities/CC_Knowledge?product=Historian__c Or this: http://www.geautomation.com/products/data-management Share this post Link to post Share on other sites
Posted 5 Feb 2016 Our work is based on Grid's protection by using GE's IEDs and we are supposed to configure them with the software called GE power Configurator ( the illustration above). We are not using Proficy softwares. Unfortunatly it's the first time we're going to work with GE software and we don't have manuals to guide us in the soft. WE have done several researches but there is anything about GE power Configurator. Share this post Link to post Share on other sites
Posted 5 Feb 2016 How old is this equipment? I can't imagine any modern equipment called "IED" in today's world of terrorists killing people with IED's? Share this post Link to post Share on other sites
Posted 5 Feb 2016 By IED I meant Intelligent Electronical Devices such as F650 used for the distribution feeder protection http://www.gegridsolutions.com/multilin/catalog/f650.htm And about the software is a 2014 version. Share this post Link to post Share on other sites
Posted 5 Feb 2016 Multilin, that makes since now. Here you go. GER-4144.pdf Share this post Link to post Share on other sites
Posted 5 Feb 2016 Here is the Software download site: http://www.gegridsolutions.com/app/ViewFiles.aspx?prod=f650&type=7 Share this post Link to post Share on other sites
Posted 8 Feb 2016 thank you for your help but I need the manual of the software below. 1 person likes this Share this post Link to post Share on other sites
Posted 8 Feb 2016 (edited) How did you take a 'screenshot' if you don't already have the software in the screenshot. This makes no sense at all! You need to call your GE supplier. Edited 8 Feb 2016 by RussB Share this post Link to post Share on other sites
Posted 8 Feb 2016 I have the Software but I dont have the manual to know how to use it. The company where I work didn't own the manual but gives me the software to work with it. Share this post Link to post Share on other sites
Posted 9 Feb 2016 Do you think that if your local rep can supply the software that just maybe they can supply any documentation that goes with it? If I were you I would have asked a long time ago. Share this post Link to post Share on other sites