Posted 11 Dec 2015 Hello gents, I have an issue were I try to upload the program in the processor. I have a copy of the program from a few months back however there have been some changes made to the program since then therefore RS5000 prompts me if I want to upload or download. The program was done in v 20.01 and thats what I have as well. When I select upload everything goes good as fa as connecting and uploading tags but as soon as it start uploading the routines it stops part way through and gives a message that Logix couldnot upload AddOn instruction. Has anyone seen this andhow did you get around it? Share this post Link to post Share on other sites
Posted 10 Jan 2016 I remember this being an issue in version 16. But I thought this was resolved. Sorry I am not much help. Share this post Link to post Share on other sites
Posted 17 Jan 2016 happen to me, somebody converted the code to 20.03 and download it, try uploading using version 20.03 on your laptop. cheers, Ganie Share this post Link to post Share on other sites
Posted 18 Jan 2016 This is the message I get when trying to upload. Share this post Link to post Share on other sites
Posted 18 Jan 2016 On 17/01/2016 at 3:59 AM, Gnex said: happen to me, somebody converted the code to 20.03 and download it, try uploading using version 20.03 on your laptop. cheers, Ganie Thanks, I have verified that my version of 20.01 is what is in the PLC as well Share this post Link to post Share on other sites
Posted 18 Jan 2016 I have only seen this with the 20.01/20.03 issue as Gnex stated. How did you confirm that 20.01 is what the program was D/L with? It will not show on the controller properties. Share this post Link to post Share on other sites
Posted 18 Jan 2016 Just now, Spada84 said: I have only seen this with the 20.01/20.03 issue as Gnex stated. How did you confirm that 20.01 is what the program was D/L with? It will not show on the controller properties. I use to work for the company that developed the program and also have the program from this past summer. I also verified with them what version is still on the PLC. I am thinking it is something on my end. Share this post Link to post Share on other sites
Posted 18 Jan 2016 (edited) 4 hours ago, mr_electrician said: This is the message I get when trying to upload. I noticed that the title says 20.13 but in my previous screen shot it is 20.11. Does this mean that I have 20.03 and am trying to upload a 20.01 version? Edited 18 Jan 2016 by mr_electrician Share this post Link to post Share on other sites