Posted 25 Oct 2015 Here is a step by step tutorial... Utilizing the CX Server DDE Manager will allow us to provide a link to the information in the Omron PLC. This link can be placed on an Excel spreadsheet. Charts, graphs, etc. can be made from the data. We will create links on an excel spread sheet from a CQM1H and a CP1L PLC. The information will then be displayed as a bar graph comparing the first ten memory areas. Here is a step by step tutorial... Watch on YouTube : Implementing the Omron CX Server DDE and Excel Let me know what you think. Regards, Garry Share this post Link to post Share on other sites
Posted 20 May 2016 Any tutorial on how to write data from the spreadsheet to the PLC? Thanks Share this post Link to post Share on other sites
Posted 24 May 2016 Jay, that is a really good tutorial on how to setup the DDE Manager and read data from the PLC but I was wondering how to write data to the PLC using the DDE Manager and Excel. Thanks Share this post Link to post Share on other sites
Posted 24 May 2016 I've forgotten everything I knew about this subject. I just don't throw anything away. Share this post Link to post Share on other sites
Posted 20 Oct 2021 ExampleDDEWrite.zip not downloaded Share this post Link to post Share on other sites
Posted 20 Oct 2021 On 5/24/2016 at 7:07 PM, Jay Anthony said: ExampleDDEWrite.zip please create link to download Share this post Link to post Share on other sites
Posted 20 Oct 2021 @Rahul_Punk_ I have fixed the link in Jay's post. Share this post Link to post Share on other sites