Posted 26 Aug 2015 I have used several 1769-L33ER processors in the past, but I have a question. I know that the processor comes with two ethernet ports. Can you use one port for communications such as on a process control network and HMI, and use the other port for drive communications. For example port 1 would be a 172.27.31.x network and port 2 would be a 192.168.1.x network. Share this post Link to post Share on other sites
Posted 26 Aug 2015 Sorry only one IP address as it is an embedded switch Quote from http://literature.rockwellautomation.com/idc/groups/literature/documents/td/1769-td005_-en-p.pdf Share this post Link to post Share on other sites
Posted 27 Aug 2015 That is what I was thinking. Thank you. Share this post Link to post Share on other sites