How to configure bmxami 0810

[udhaya 1]

Hi all, I'm using M340 logic controller and in that i'm adding bmxami0810 analog module, i can able to set the analog input range settings and scalings, but i don't know how to read and transfer the analog values from module to CPU memory address. Note:programming through unity pro XL V7.0, Help me Thanks in advance

[PLCRune 2]

The adress in program is %IW0.X.Y.0 where X is position of card in the rack and y is channel connected on the card. So if you have one rack and the card is positioned in slot 2 and you connect chennel 0 the adress is %IW0.2.0.0