CAPS Software

[ECSI 17]

I see a few references to Caps software in previous posts here. I just got a call from a customer whose C20K battery died and he lost the programming. We found the original programmer in texas and he sent us the Caps program file, but he doesn't have the software to reload it. Does anyone know where I can get this program? Thanks

[Sleepy Wombat 27]

Caps was originally developed by Wamco software ( i think a canadian based company ???) Not a bad little package for the time, i found it a lot easier to use then LSS.....Unfortunately i don;t know where my disk is, if i find it i will let you know... The program was dongle protected, and i think that there is a bypass in the download section.....have a search.....

[ECSI 17]

Yes, I already found the bypass program and downloaded it. Now all I need is the software. I hope you find it! Thanks

[BobB 58]

Here is a link Edited by Chakorules...

[Chris Elston 78]

In an interested to keep the good standing sprit of MrPLC.com and not to promote or host any kind of questionable content and after talking with all parties involved through private message... It was decided to remove the Caps download and Caps software key download. I don't want to be mean, nor do I ever want to discourage helping each other, but I have to watch and be mindful of things that can be shared legally on MrPLC.com. Neither I nor anyone else was positive of the status of the Caps software company legal rights, so therefore fell into the "questionable" category of material. Please see our terms of service for a quick review: http://www.mrplc.com/tos.shtml If anyone has further information about the now defunct Caps software company makers or a signed noticed from the Cap software company that it's ok to post and host it's software products, then we would be more that willing to re upload and distributed this media with no remorse or second thoughts. But until then, we can’t allow it. Very sorry to be the bearer of bad news, MrPLC.com is 100% supportive of paying for software that software designers make for PLC companies. I don’t know if Caps can still be bought or where it can be purchased is one thing that bothers me, however for now I know of some substitute products that can be located here: SSS Demo Software Download http://forums.mrplc.com/index.php?act=Downl...s&CODE=02&id=84 LSS Demo Software Download http://forums.mrplc.com/index.php?act=Downl...s&CODE=02&id=81 If I missed any, you can browse the Omron Demo Software downloads here: http://forums.mrplc.com/index.php?act=Downl...&CODE=01&cat=12 Or feel free to ask Jay, BobB, or Sleepy Wombat for any other suggestions. Thanks for reading. Please post any comments or thought here.

[mrdoitmyself 0]

You are close. Wamco Software Systems, Inc. was located in South Dartmouth, MA. I believe the company was a one man band. The company went defunk several years ago. I still have the software and one key. I did have 2 keys but lost one. When ever we run across a PLC that was programmed using CAPS and it's not a 'K' series we have been switching it over to CX-Programmer. As far as the 'K' series, we are stuck with CAPS. I would like to obtain the bypass for the dongle. We sure could use it. Zip and email it to me if you have it.