I-designer/ExterT150/download/transmission error

[s1fis 0]

Hi everybody! I'm new at your forum. Actually I did not want to register here 'cause I thought that I could solve all my problems by myself. Unfortunately, I have a very important issue regarding downloading to a Beijer T150 and T100 from Information designer (v1.52 biult 344) over ethernet from my PC with a crossover cable (or even with a straight one). HMI firmware is the latest: v1.53 B226. Actually the download sticks during the project transfer while the status is: "Deleting unused drivers". At the same time, the I-Designer retries, totally 12 times and then: "Transmission error". I tried to uninstall and install again I-designer but nothing. I download from another PC and it works just fine. The port is OK. The IP address of my PC is the proper one (or else I wouldn't have any network). I'm pretty sure that something is wrong with my PC but the weird thing is that I work with that PC almost one year now and I have done a lot of projects with these HMI. That problem appeared suddenly! Firewall is off. Anti-virus is also off. Is anybody ever faced similar problem again? Any proposal is acceptable. Thanks in advance! Iosif Automation Engineer Bsc

[kaare_t 155]

Did you try the same panel from both computers, or different panels for each computer?

[s1fis 0]

I had tried the same panel from both comuters but anyway the problem has been solved but I have no idea what caused that! I just uninstall and reinstall network's card drivers! Rediculous? May be! These are devil's stuff! Thank you all for your time.

[kaare_t 155]

OK, glad it's solved!