B&R Automation studio

[heyway1 0]

Hi, I want to run the CoffeeMachine project. Can someone give me steps to run this project? Simply, how to run a project in b&r software? Thanks.

[Benlabrume 0]

Hello, To run coffee machine project, -Open Automation Studio, AS should open on the start page, if not go on Help Menu >> Show start page. -Once on the start page, On the left side, you have some menus, select Getting started. -Click on Coffee Machine link, Automation Studio (AS), will ask you to extract the project in your hard drive (by default C:/Project). Click on Open button and wait until the end of the excrtact procedure. -Once it's done, you should arrive in AS on the logical view. In this view, you have all programs for this project. Remember than AS authorize you to have one program (Logical view) for multi CPU. -Click on the configuration view (This view show you all CPU's configured for this project.) In this case, you can see than this project is able to run on Simulator (Default), And in a 4PP420. -Normally, when you open coffee machine project, simulation configuration is set by default, simulator souhld run on your computer (Icon in the task bar named AR010 or ARsim). -In Automation Studio, you should already be connected to simulator (You can check this on the lower side of AS application >> RUN). -Now trnasfert the project into the simulator (ctrl +F5 or transfert button in AS.) -Once the project is transfered, start your VNC view software to access to HMI.Adress is 127.0.0.1 and password is "c". -Coffee machine should run in your computer. I really invite you to read B&R Help, you will find all informations you need about Automation Studio (How to program, debug, transfert, add configurations etc.) Hope this can help you! Ben La Brume