FX3U, FX3U-ENET-L and FX3U-ENET

[kaare_t 155]

1. Yes, the ENET-ADP module is pretty new, hence the "high" version number 2. No You have 2 alternatives: 1. Buy a FX3U-ENET module and connect it on the right hand side (and use FX Configurator-EN) 2. Buy a new FX3U CPU, with the higher version number

[waynes 8]

kaare_t, Thank you for your reply. I will get the local guys to swap the PLC's out as I bought it 2 weeks ago with the ENET-ADP cards.

[Crossbow 295]

D8001, last 3 digits. It is accurate they need 3.10. And you will not need FX Configurator-EN, it can all be set up in GX Works2. In the version of GX Works2 which supports it, you will see a new tab called Ethernet Adapter at the right end of the PLC parameters. You only need the configurator for the module, not the adapter.