remote access via VPN and sending data between PLC in LAN

[pszczepan 2]

I have problem to make correct CJ1M setup to work with routing table and at the same moment working in LAN to send date to NSJ I have NSJ - 172.16.20.1 I have CJ1M -172.16.20.2 When I have no routing table SEND, RECV work correct When I set routing table as below I can have remote access via VPN but when I have such a parameters FINS command like SEND, RECV does not work. How I should configure that? Thanks in advance PAwel

[Harald_Brueck 0]

Hi, the screenshot shows the IP-address table, not the FINS routing table. You have not enabled the table. Please set 'Combined' under Conversion. The IP-address table is only needed, if you would like to download new NS-projects with CX-Designer. In all other cases you can use also Ethernet/TCP and you don't have to care about FINS node numbers.