Posted 13 Jun 2011 Hi all, I'm trying to send an email from a Omron PLC CJ1M CPU 22. my ETN11 The set up is done according some examples I have find on this forum and some others. My PLC is connected to a Network, I have the SMTP IP Adress and it works fine with email option from Red Lion. Here is my set up on the PLC: I turn the bit 1524.03 or 1525.03 ON when I would like to send an email. SMTP is the same then my network administrator use to send emails to all the others PC's. I use DM3000 for the message and the last one DM3010 set up on 0000 I use my email adress to see if I'm sending some email or not. send email options all of them are selected, to see if I can get some on my incoming email. There is some part missing on this set up? Can some body let me know what I'm doing wrong? Thanks for your help Jose Share this post Link to post Share on other sites