Micrologix 1400

[mpereira 2]

I would like to know if its possible to use Channel 2 on the Micrologix 1400 to upload/download the program. Channel 0 is currently being used by a Panelview 600 screen. I know I can add an AIC module but is it posiible to use this port as the programming port and which cable is required? Thank you. Manuel

[fuzzy logic 0]

Yes, of course... use a 1747-CP3 cable if your PC has a 9 pin RS-232 port available, or a 9300-USBS if not. - fuzzy logic